URETHANE
ENAMEL (UB) These Kosmic Kolor urethane enamel
Solid colors may be applied over any of our SHIMRIN
Universal Base Coats. Available in JetBlack and
Brite White. KU100 Kosmic Catalyst and Kosmic
Reducer required.
POLYURETHANE
ENAMEL (UFB) These Kosmic Kolor polyurethane enamel
Solid colors may be applied over any of our SHIMRIN
Universal Base Coats. Available in JetBlack, Brite
White and Kosmos Red. They require KU-500 Kosmic
Catalyst and Kosmic Reducer.
EXEMPT
CATALYST (KU150) This product must be mixed with other
products before use. KU150 is a multi-purpose
catalyst for urethane finishes. It is used in
the KO-SEAL® II Primer Selaers, UC35, and
UFC35 Kosmic Klears.
CATALYST
(KU190) For use in UFC19 Komply Klear® only
and must be mixed with UFC19 before use.
KRATOR
ELIMINATOR (KE170) KE170 is a fisheye additive that doesn't
need to be used in every coat. It corrects fisheyes
or crater defects, and works with lacquer, urethane,
acrylic enamel, acrylic urethane, polyurethane,
etc. a must have product for your paint shop.
INTERCOAT
CLEAR (SG100) A protective clear for artwork tape
outs on SHIMRIN®Base Coats. May be used to
blend SHIMRIN® Pearl and Metallic Base Coats,
to mix Pearl and Kandy Koncentrates, and to cut
the SHIMRIN‚ base for touchups and blends.
NOTE: Use only when top coating with urethane
enamel.
POLYURETHANE
ENAMEL KLEAR (UC35) A two-component acrylic urethane primer
sealer. KO-SEAL II has two series of products:
one series meeting the VOC requirements for National
Rule, and one series meeting the VOC requirements
for SCAQMD Rule 1151. KO-Seal is easy to sand
and is available in black, white and metallic
colors.
POLYURETHANE
FLO-KLEAR (UFC19) This product is a 1.9 VOC polyurethane
clear coat with application properties of low
solids clear coats. UFC19 is 33% solids as applied
and buffs easily the next day. It meets the low
VOC regulations and handles like conventional
clear coats like UFC1. It gives a high gloss finish
with excellent weathering and UV resistance. Requires
KU190 Catalyst and Kosmic Reducer.
POLYURETHANE
FLO-KLEAR (UFC35) This product is a 3.5 VOC, National
Rule and SCAQMD Rule 1151 compliant product. It
may be used to topcoat any of our urethane or
polyurethane enamels, or any of our SHIMRIN®
Base Coats. UFC35 gives an ultrahigh gloss finish
with good abrasion resistance, is very flexible
and polishes and buffs easily. Requires KU150
Catalyst and Kosmic Reducer.
VOC
EXEMPT REDUCER (RU300) RU300 can be used to reduce all Kosmic
System products: Kandys, Clears, and all Shimrin
‚ base coat It will not change the VOC content
of any product it is added to, and will not react
with any coating. It is a fast to medium dry reducer
that can be blended with other reducers for varied
dry times.
FAST
DRY REDUCER (RU310) RU310 is recommended for use with our
Kosmic Kolor® Base Coats, Shimrin® Base
Coats, Kandys, and Klears. Has staged release
for proper flow out, leveling, and gloss retention.
SLOW
DRY REDUCER (RU312) RU312 is recommended for use with our
Kosmic Kolor® Base Coats, Shimrin® Base
Coats, Kandys, and Klears. Has staged release
for proper flow out, leveling, and gloss retention.
[
